Call 08046061446 71% Response Rate

our range

MRF Paint

Our range of products include mrf campus exterior emulsion paint, mrf altura interior and exterior emulsion paint 10 litre, mrf visa interior emulsion paint, mrf metal coat multipurpose premium pu finish paint, mrf eezeewood 1k pu wood finish paint and mrf wood coat pu wood finish exterior paint.
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
  • MRF Campus Exterior Emulsion Paint
MRF Campus Exterior Emulsion Paint

MRF Campus Exterior Emulsion Paint

Rs 2,100  / BucketGet Best Price

Minimum Order Quantity: 10 Bucket

Packaging Size10L
Packaging TypeBucket
BrandMRF Vapocure Paints
Form Of PaintLiquid
ApplicationPainting
Performance Warranty3 Years
Item NameCampus
Surface Preparation
  • Ensure that the surface is clean and free from dampness, dirt and other contamination.
  • For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process
  • Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
  • Eco-friendly Lead Content - Less than 90 PPM
  • - UV Resistance : relative to colour
Thinning
  • Stir well before thinning the Paint

  • Mix 40 - 45% of potable water

Application Procedure
  • Ensure that fresh walls are coated with one to two coats of white cement before initiating the painting process
  • Apply 1 – 2 coats of Wall Primer Exterior with an interval of 3 – 4 hrs between subsequent coats
  • Sanding of the first / second coat of Wall Primer Exterior can be done using #320 Sandpaper
  • Apply 2 coats of Campus Exterior Emulsion with an interval of 4 to 5 hours between subsequent coats. Sanding of the first coat of top coat can be done with #600 Sandpaper
  • The number of coats of top coat depends on the chosen colour
  • Darker shades may require additional coats

 

View Complete details

get quote request a call back
  • MRF Altura  Interior And Exterior Emulsion Paint 10 Litre
  • MRF Altura  Interior And Exterior Emulsion Paint 10 Litre
MRF Altura  Interior And Exterior Emulsion Paint 10 Litre

MRF Altura Interior And Exterior Emulsion Paint 10 Litre

Rs 3,470  / LitreGet Best Price

Minimum Order Quantity: 10 Litre

Packaging Size10L
Packaging TypeBucket
BrandMRF Vapocure Paints
Form Of PaintLiquid
ApplicationPainting
Performance Warranty5 Years
Item NameAltura
Surface Preparation
  • Ensure that the surface is clean and free from dampness, dirt and other contamination.
  • Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall
  • For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process
  • Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
Thinning
  • Stir well before thinning the Paint

  • Mix 35 - 40% of potable water

  • For Interior Walls
  • Ensure that fresh walls are coated with one or two coats of white cement
  • Apply 2 coats of Altura Wall Primer with an interval of 4 - 5 hrs between subsequent coats
  • Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty
  • Sanding of the first / second coat of Altura Wall Primer can be done using #320 Sandpaper
  • Topcoat can be applied after an interval of 4 - 5 hrs of the second coat of Altura Wall Primer
  • For Exterior Walls
  • Ensure that fresh walls are coated with one or two coats of white cement
  • Apply 1 to 2 coats of Altura Wall Primer with an interval of 4 - 5 hrs between subsequent coats
  • Sanding of the first / second of Altura Wall Primer can be done using #320 Sandpaper
  • Topcoat can be applied after an interval of 4 - 5 hrs of the second coat of Altura Wall Primer

View Complete details

get quote request a call back
  • MRF Visa Interior Emulsion Paint
  • MRF Visa Interior Emulsion Paint
MRF Visa Interior Emulsion Paint

MRF Visa Interior Emulsion Paint

Rs 1,800  / BucketGet Best Price

Minimum Order Quantity: 10 Bucket

Packaging Size10L
Packaging TypeBucket
Usage/ApplicationInterior
BrandMRF Vapocure Paints
Paint TypeEmulsion
FinishHigh Gloss
Form Of PaintLiquid
Performance Warranty3 Years
Item NameVisa
Surface Preparation
  • Ensure that the surface is clean and free from dampness, dirt and other contamination.
  • Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall
  • Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
  • Thinning
  • Stir well before thinning the Paint

  • Mix 40 - 45% of potable water

Application Procedure

  • Ensure that fresh walls are coated with one to two coats of white cement
  • Apply 2 coats of Wall Primer Interior with an interval of 3 – 4 hrs between subsequent coats
  • Undulations in the wall can be levelled using any good quality acrylic putty or cement powder putty
  • Putty should be used between the first and second coat of Wall Primer Interior . Sanding of the putty shall be done as per recommendation
  • Apply 2 coats of Visa Interior Emulsion with an interval of 4 to 5 hours between subsequent coats, after subjecting the second coat of Wall Primer Interior to sanding with #320 Sandpaper
  • Sanding of the first coat of top coat can be done with #600 Sandpaper
  • The number of coats of top coat depends on the chosen colour
  • Darker shades may require additional coats

View Complete details

get quote request a call back
MRF Metal Coat Multipurpose Premium PU Finish Paint

MRF Metal Coat Multipurpose Premium PU Finish Paint

Rs 1,175  / CanGet Best Price

Minimum Order Quantity: 10 Can

Packaging Size1L
Packaging TypeCan
BrandMRF Vapocure Paints
Surface Of ApplicationWood
UsagePainting
FormLiquid
Item NameMetal Coat
Surface Preparation
  • The surface to be coated should be clean and free from contamination
  • Mill scale and rust should be completely removed either by mechanically abrading the surface or through abrasive blast clean technique
  • The substrate should be free from dew as it directly relates to premature product failure
  • Apply Using Available in Clear, Glossy, Metallic and Matt Finishes
  • Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 - 45 psi

  • Application Procedure
    Mix the base thoroughly prior to mixing with the hardener
    Avoid applying in direct sunlight or when the humidity is very high
    For application details, please refer product data sheet in downloads menu
    Lead Content - Less than 90 PPM
  • The PU promise All weather resistant

View Complete details

get quote request a call back
MRF Eezeewood 1K PU Wood Finish Paint

MRF Eezeewood 1K PU Wood Finish Paint

Rs 420  / LitreGet Best Price

Minimum Order Quantity: 10 Litre

Packaging Size1L
Packaging TypeTin Can
BrandMRF Vapocure Paints
Surface Of ApplicationWood
FormLiquid
Item NameEezeewood
Preparation

  • The raw wooden surface to be coated should be clean, dry, free from moisture ,dampness and other contamination
  •  For hard wood, sand the surface using Sandpaper #80, followed by Sandpapers #120, #150, #180 and #220
  • For Veneer ply surfaces,start with Sandpaper #220
  •  Always sand in the direction of the wood grain
  •  Apply UsingManual Brush Application
  •   Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 - 45 psi
    Thinning Details
  •     Thinner Recommended - Thinner 3834

View Complete details

get quote request a call back
MRF Wood Coat PU Wood Finish Exterior Paint

MRF Wood Coat PU Wood Finish Exterior Paint

Rs 1,185  / LitreGet Best Price

Minimum Order Quantity: 10 Litre

Packaging Size1L
Packaging TypeTin Can
BrandMRF Vapocure Paints
Surface Of ApplicationWood
FormLiquid
Item NameWood Coat
Surface Preparation
  • The raw wooden surface to be coated should be clean, dry, free from moisture ,dampness and other contamination
  • For hard wood, sand the surface using Sandpaper #80, followed by Sandpapers #120, #150, #180 and #220
  • For Veneer ply surfaces,start with Sandpaper #220
  • Always sand in the direction of the wood grain
  • Apply Using
  • Conventional Spray, Nozzle orifice: 0.059 inches, Pressure: 35 - 45 psi

  • Application Procedure

    Mix the base thoroughly prior to mixing with the hardener. Avoid applying in direct sunlight or when the humidity is very high.

    Apply 2 to 3 coats of WoodCoat High Solids Sealer clear with an interval of 8 hours between the subsequent coats. Sanding should be done prior to the application of each coat

    Sandpaper #220 can be used for the first coat and Sandpaper #400 can be used for the second and third coats

    The number of coats of sealer required varies from 2 to 3 depending on the absorption of wood. Apply 2 coats of either WoodCoat Exterior Glossy clear or WoodCoat Exterior Silky Matt clear depending on the requirement. Sand the first coat with Sandpaper #600, after 8 hours of drying

    MRF Woodstains Exterior shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear sanding of the applied shade is not permitted

    For exterior applications use Woodstains exterior shades only

Thinning Details
  • Thinner Recommended - Thinner for finish

  • WoodCoat High Solids Sealer Clear 15 - 20%
  • WoodCoat Ext.Glossy Clear 30 - 35%
  • WoodCoat Ext.Silky Matt Clear 25 - 30%
  • The PU promise All weather resistant

    View Complete details

    get quote request a call back
    MRF Specta PU Enamel Paint

    MRF Specta PU Enamel Paint

    Rs 400  / LitreGet Best Price

    Minimum Order Quantity: 10 Litre

    Packaging TypeTin Can
    FinishHigh Gloss
    Surface Of ApplicationWood
    Packaging Size1L
    BrandMRF Vapocure Paints
    Form Of PaintLiquid
    Item NameSpecta
    Surface Preparation Metal
    • Ensure that the surface is dry, clean and free from impurities like oil, grease, loose rust and cracked or flaked paint
    • Sand the surface with #180 Sandpaper and ensure that no loose particles are present before priming. Wipe the surface clean
    • Wood
    • The raw wooden surface to be coated should be clean, dry, free from moisture, dampness and other contamination
    • Sand the surface using #80 Sandpaper, followed by grit sizes #120, #150, #180 and #220 Sandpaper
    • This step wise approach leads to a very smooth surface
    • Always sand in the direction of the wood grain. This step wise process is applicable only for hard wood. Start with #220 Sandpaper for Veneer/ Plywood
    • Application Procedure Metal
    • Apply 2 coats SPEP Primer Grey with an interval of 4-6 hours between subsequent coats either by spray or brush
    • The primed surface can be sanded using #220 Sandpaper after 10-12 hours of drying.
    • Appropriate filler to be used for filling dents and imperfections which should then be sanded and primed again.
    • Apply 2 coats of Specta Glossy/Stain shede with an interval of 6-7 hours by brush or spray.
    • Wood
    • Apply 2 to 3 coats of MRF Vapocure paints Wood Primer with an interval of 5-6 hours between subsequent coats.
    • Sanding should be done prior to application of Topcoat.
    • #400 Sandpaper can be used for sanding after 10-12 hours of drying.
    • Apply 2 coats of Specta Glossy/Stain shede with an interval of 6-7 hours by brush or spray.
    Thinning Details
    • Mix the paint thoroughly prior to thinning

    • Thinner Recommended - Thinner 555

    • Thinner Intake for spray 30 - 35%
    • Thinner Intake for brush 15 - 20%

      View Complete details

      get quote request a call back
      MRF Melamine Econimical Wood Finish Paints

      MRF Melamine Econimical Wood Finish Paints

      Rs 446  / LitreGet Best Price

      Minimum Order Quantity: 10 Litre

      Packaging Size1L
      Packaging TypeTin Can
      BrandMRF Vapocure Paints
      Surface Of ApplicationWood
      Item NameMelamine
      FormLiquid
      Surface Preparation
      • coated should be clean, dry, free from moisture ,dampness and other contamination
      • For hard wood, sand the surface using Sandpaper #80, followed by Sandpapers #120, #150, #180 and #220
      • For Veneer ply surfaces,start with Sandpaper #220
      • This step wise approach makes the surface smooth
      • Always sand in the direction of the wood grain
      Thinning Details
      • Thinner Recommended - Thinner 3830

      • Melamine Sealer Clear 25 - 30%
      • Melamine Matt Clear 25 - 30%
      • Melamine Glossy Clear
      • Application Procedure
      • Mix the base thoroughly prior to mixing with the hardener
      • Avoid applying in direct sunlight or when the humidity is very high
      • Apply 2 to 3 coats of Melamine Sealer clear with an interval of 8 hrs between subsequent coats. Sanding should be done prior to the application of each coat. The number of coats varies depending on the absorption of wood
      • #220 Sandpaper can be used for the first coat and #400 Sandpaper can be used for the second and third coats
      • Apply 2 coats of either Melamine Glossy Clear or Matt Clear depending on the requirement, with an interval of 8 hrs between subsequent coats. Sanding of the 1st coat of top coat shall be done with #600 or #1000 Sandpaper
      • MRF Woodstains Interior shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear sanding of the applied shade is not permitted
      • For Interior applications use Woodstains Interior shades only

      View Complete details

      get quote request a call back
      • MRF Aquafresh Interior Polyurethane Based Wall Finish Paint
      • MRF Aquafresh Interior Polyurethane Based Wall Finish Paint
      MRF Aquafresh Interior Polyurethane Based Wall Finish Paint

      MRF Aquafresh Interior Polyurethane Based Wall Finish Paint

      Rs 5,650  / BucketGet Best Price

      Minimum Order Quantity: 10 Bucket

      Packaging Size10L
      Packaging TypeBucket
      Usage/ApplicationPainting
      BrandMRF Vapocure Paints
      FinishHigh Gloss
      Form Of PaintLiquid
      Item NameAquafresh
      Performance Warranty7 Year
      Surface Preparation
      • Ensure that the surface is clean and free from dampness, dirt and other contamination.
      • Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall
      • For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process
      • Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
      Thinning
      • Stir well before thinning the Paint

      • Mix 35 - 45% of potable water

      • For Interior Walls
      • Ensure that fresh walls are coated with one or two coats of white cement
      • Apply 2 coats of AquaFresh Wall Primer with an interval of 4 - 5 hrs between subsequent coats
      • Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty
      • Sanding of the first / second coat of Aquafresh Wall Primer can be done using #320 Sandpaper
      • Topcoat can be applied after an interval of 4 - 5 hrs of the second coat of AquaFresh Wall Primer
      • For Exterior Walls
      • Ensure that fresh walls are coated with one or two coats of white cement
      • Apply 1 to 2 coats of AquaFresh Wall Primer with an interval of 4 - 5 hrs between subsequent coats
      • Sanding of the second coat of AquaFresh Wall Primer can be done using #320 Sandpaper
      • Topcoat can be applied after an interval of 4 - 5 hrs of the second coat of AquaFresh Wall Primer

      View Complete details

      get quote request a call back

      EXPLORE MORE CATEGORIES